Color Printer Toner Cartridge Should Pay Attention to These Problems in Use
Recently I have sorted some of the problems of the users in the use of color printer cartridge, in order to ensure that you have paid for the normal work of the toner cartridge, I will provide the following these problem and some advice for you as reference.
- Please put the toner cartridge in the corresponding laser printer in the right direction
- Do not open the toner cartridge’s hood and touch the surface of the sensitive drum.
- Do not turn the sensitive drum casually.
A few phenomena that appear frequently in toner cartridge
- Toner leakage powder: in addition to the shell damage, it is usually the reason for the magnetic stick powder in the toner cartridges during the transportation process or during the use of some users. The solution is so simple that you just turn the drum core in a few circles.
- Print file and the drum chip appear at the same time the same width of the same width of the vertical black road, the general customers also think is the leakage powder, in fact this is the scraping plate went wrong, which leads to the carbon powder in the core of the stick is not clean.
- The vertical thin black road appear on the printed document: usually the scratches on the edge of the scratch board and the scratch board are glued to the dirt or scraps of paper. Certainly a high quality toner cartridge won’t appear this problem such as large capacity and high quality hp 131a toner.
- There is a horizontal underworld in the print file: usually the magnetic sticks the powder in the toner cartridge and you just make it go along a few turns and then can work.
- If there is an obvious bottom grey on the print file, it is usually a matter of a drum core or carbon powder has problems.
- The color of the print file is uneven and the print materials have apparent white lines: you can’t still see the carbon powder from the outside magnetic stick. If you can see the powder in some places of magnetic stick and on powder in some places, it shows that the carbon powder in the drum unit has run out of.
- If the printer sends out a bland sheet of paper: check the printer first if there is any problem. If there is no problem, then the toner cartridge are out of question during assembly
So it’s important to buy a reliable toner cartridge, if you get an inferior one you will cost many energetic to fix it and even sometimes the most expensive one may not suit you, you should pay attention to a few cautions when you use printers and cartridges.
